Films tailored to your products Your specific needs in terms of weldability, mechanical properties, printability, slip resistance, etc. define the composition and processing of your CUSTOM FILM in complete confidentiality.
It can be neutral, solution-dyed or printed in up to 8 colours.
read more
There are many industrial applications for polyethylene and polypropylene films:
SHRINK-WELDABLE COMPRESSION FILM. Reduces logistics costs for compressible materials. Waterproof and UV-resistant, it can be used to store materials outdoors.
COMPRESSION FILM rolls are also your communication and traceability media, with flexo printing in up to 8 colours.
THIN BAG LINDER FILM protects paper bags from moisture while facilitating the filling of powders through ventilation specific to your product or production conditions. Thin sack liner films are available from 7 to 20 microns, with or without corona treatment, and with or without perforations or notches.
FILM DE COMPLEXAGE INDUSTRIEL est développé pour vos besoins, jusqu’à une laize de 2800mm. Il est neutre ou teinté dans la masse et peut être imprimé suivant les besoins de votre client. La composition des différentes couches de matière, en polyéthylène ou en matière bio-sourcée ou bio-dégradable, est définie en fonction de votre process de transformation.
INDUSTRIAL BONDING FILM is developed to meet your needs, up to a width of 2800mm. It can be neutral or solution-dyed and can be printed according to your customer's requirements. The composition of the different layers of material, in polyethylene or bio-sourced or bio-degradable material, is defined according to your transformation process.
Retrouvez toutes nos actualités à travers nos newsletters afin d’être informé de nos innovations, nouveautés sur toutes nos solutions, participer à nos événements.
Demand is changing, and consumers no longer want to remain mere spectators of the deteriorating climate. They feel involved in the act of purchasing and its consequences for the environment.
The rules are changing, the environmental shift has been taken and is part of a regulatory and fiscal framework, the movement is unstoppable and markets are closing to the least green companies.
The supply side is changing, companies are reducing their environmental footprint, we are learning to consume fewer resources and less energy, to generate less greenhouse gas and waste, and to create products that can be recycled.
Over several phases of the product life cycle. We can help you to sort waste more quickly and recover it where appropriate.
Proof in figures
What are the results of this continuous improvement approach?
The life cycle analysis has enabled us to highlight the 5 items that have the greatest impact, namely :
raw materials, particularly paper
water consumption
electricity and gas consumption. and waste reduction.
CGP INDUSTRIES is a pioneer in the environmental approach with the sorting and recovery of our waste, the introduction of eco-design and the completion of an Energy Diagnostic and Carbon Footprint for the site.
CGP INDUSTRIES continues to improve its environmental performance, focusing on energy savings:
• 315,000 kWh/year thanks to the installation of 6 Electronic Variable Speed Drives on our furnace and compressor motors. • 26,000 kWh/year thanks to its policy of optimising lighting in the workshops by replacing old luminaires with ferromagnetic ballasts with new luminaires with electronic ballasts. • 2,200,000 kWh/year thanks to the launch of a heat recovery project, using the hot air discharged by the furnaces to preheat incoming air. • 14% less gas used thanks to a reduction in furnace extraction rates.
Areas for future improvement :
172,000 kWh/year by installing destratifiers throughout the workshop.
CGP INDUSTRIES is a pioneer in the environmental approach with the sorting and recovery of our waste, the introduction of eco-design and the completion of an Energy Diagnostic and Carbon Footprint for the site. CGP INDUSTRIES continues to improve its environmental performance, focusing on energy savings: • 315,000 kWh/year thanks to the installation of 6 Electronic Variable Speed Drives on our furnace and compressor motors. • 26,000 kWh/year thanks to its policy of optimising lighting in the workshops by replacing old luminaires with ferromagnetic ballasts with new luminaires with electronic ballasts. • 2,200,000 kWh/year thanks to the launch of a heat recovery project, using the hot air discharged by the furnaces to preheat incoming air. • 14% less gas used thanks to a reduction in furnace extraction rates.
Areas for future improvement :
172,000 kWh/year by installing destratifiers throughout the workshop.
AN ECO-DESIGNED RANGE: STABULON® ANTI-SLIP SPACER PADS
Why is the STABULON® anti-slip spacer range eco-designed?
The Green Touch is not a niche, it's a profitable and winning value proposition that we'd like to share with you.
Greener, but not more expensive! It's obvious.
Greener, but no worse! All our products perform identically to products before the approach.
For as many people as possible ... our products are a service to you, whether you are sensitive to environmental arguments or not. They enable you to reduce your costs, cut your packaging consumption and reduce your waste.
Visibly green! To reinforce our commitment to our planet, we have created an Eco-LOGO on all the products in the range, attesting to our efforts to improve environmental performance at several stages in the product life cycle. Thanks to our Eco-logo, you can identify the eco-designed approach of the product and communicate.
Different in use! Thanks to us, all products bearing the Eco-logo go straight into the paper bin, so we can help you sort your waste more quickly and recycle your waste where appropriate. For the rest, all the functional and application characteristics have remained unchanged.
Areas for future improvement :
172,000 kWh/year by installing destratifiers throughout the workshop.